Integrated reinforcement of carbon nanotube fibers for enhancement of their applicability, mechanical and electrical properties

Abstract

This study presents an integrated strategy combining wet-chemical and dry-mechanical processes to enhance the properties and applicability of commercial directly spun carbon nanotube fiber (CNTF) with a high linear density of ∼ 6 tex (g km−1). The sequential wet-chemical process is demonstrated for the first time based on the cross-linking of polyethyleneimine (PEI) with pyrogallol (PG). The PEI and PG (PEI@PG) treatment of CNTFs improves their properties, followed by twisting to enhance their density and alignment. These rapid sequential processes can be completed within 1 min, and the twisted PEI@PG CNTFs exhibit enhanced tensile strength, modulus, and electrical conductivity from 27.27 MPa, 0.50 GPa, and 2,685 S cm−1 to 202.44 MPa, 5.89 GPa, and 4,370 S cm−1. The twisted PEI@PG CNTF shows an improved gravimetric capacitance from 4.92 to 10.33 F g−1. The twisted Au nanoparticle-loaded PEI@PG CNTFs are harnessed as a fibrous catalyst for hydrogenation of 4-nitrophenol with a high activity of 0.054 min−1 and electrochemical glucose sensors with high sensitivity of 304.06 mA mM−1 cm−2, detection limit of 0.166 μM, and a wide linear range from 0.548 μM to 8.0 mM, respectively. This strategy offers a simple, rapid, and scalable route to enhance the performance and applicability of CNTFs. © 2025