High Performance Electrochemical Supercapacitors Based on Electrodeposited RuO2 on Graphene Sheet Electrodes

Citations

WEB OF SCIENCE

5
Citations

SCOPUS

4

초록

Ruthenium oxide (RuO2) electrode films with nanoscale morphologies were prepared on flexible Cu and Cu/graphene papers by using a cost-effective electrodeposition technique. Uniform spherical RuO2 grains formed on the graphene/Cu substrate while agglomerated RuO2 grains were observed on the Cu substrate. The RuO2/graphene/Cu electrode exhibited a high specific capacitance of similar to 930 F/g at a 5 mV/s scan rate, a comparably good electrochemical stability about 55% after 500 charge-discharge cycles, and a good rate capability. The specific capacitance of the RuO2/graphene/Cu electrode was of approximately three times more than that of the RuO2/Cu electrode (similar to 303 F/g), and the same ratio was maintained even for a 100 mV/s scan rate. The improved specific capacity of the RuO2/graphene/Cu was a result of the synergetic effect of the graphene and RuO2, which resulted in a large effective surface area and leads to an increase in the Li+2 ions and that are adsorbed and charge transport with greater ease.

키워드

Ruthenium OxideGrapheneCu SubstrateSupercapacitorsRUTHENIUM OXIDE COMPOSITECATHODIC ELECTRODEPOSITION
제목
High Performance Electrochemical Supercapacitors Based on Electrodeposited RuO2 on Graphene Sheet Electrodes
저자
Cho, SangeunInamdar, A. I.Pawar, S. M.Kim, JongminJo, YongcheolHan, JaeseokKim, HyungsangJung, WoongKim, Hyung BaeIm, Hyunsik
DOI
10.1166/jno.2015.1748
발행일
2015-04
유형
Article
저널명
Journal of Nanoelectronics and Optoelectronics
10
2
페이지
286 ~ 289