Characteristics of surface passivation of ozone-and water-based Al2O3 films grown by atomic layer deposition for silicon solar cells

Citations

WEB OF SCIENCE

5
Citations

SCOPUS

6

초록

We investigated the effects of the thermal stability of atomic layer deposition (ALD) oxidants on the surface passivation of ALD-Al2O3 film. The results showed good passivation at temperatures not greater than 780 degrees C. However, we found that Al2O3 films with an ozone oxidant showed better surface passivation at high temperatures than the water-based samples. The Al2O3 films with a water oxidant yielded an additional interfacial oxide upon high-temperature annealing. In the case of the ozone-based samples, the interfacial Si-O bonds that formed during deposition were more stable. This structural change degraded chemical passivation, which increased the interface-trap density to similar to 10(12) eV(-1) cm(-2). The passivation performance of ALD-Al2O3 films showed that at temperatures over 780 degrees C the passivation quality was affected more by defective passivation at the Si/SiOx interface than by a negative-fixed charge.

키워드

Surface passivationAtomic layer depositionSilicon-based solar cellsOzoneAluminum oxideAluminaThermal stabilityALD AL2O3
제목
Characteristics of surface passivation of ozone-and water-based Al2O3 films grown by atomic layer deposition for silicon solar cells
저자
Cho, Young JoonChung, Kwun-BumChang, Hyo Sik
DOI
10.1016/j.tsf.2018.01.027
발행일
2018-03-01
유형
Article
저널명
Thin Solid Films
649
페이지
57 ~ 60