Synthesis and oxygen permeation properties of Ce0.8Sm0.2O2-d - Sm1-xSrxCu0.2Fe0.8O3-d dual-phase ceramic membranes: effect of Strontium contents and Pd coating layer
- Authors
- Magnone, Edoardo; Chae, Jinwoong; Park, Jung Hoon
- Issue Date
- Aug-2018
- Publisher
- ELSEVIER SCI LTD
- Keywords
- Dual-phase ceramic membrane; MIEC; Strontium content; Surface modification; Oxygen permeation properties; Triple phase boundary
- Citation
- CERAMICS INTERNATIONAL, v.44, no.11, pp 12948 - 12956
- Pages
- 9
- Indexed
- SCI
SCIE
SCOPUS
- Journal Title
- CERAMICS INTERNATIONAL
- Volume
- 44
- Number
- 11
- Start Page
- 12948
- End Page
- 12956
- URI
- https://scholarworks.dongguk.edu/handle/sw.dongguk/9192
- DOI
- 10.1016/j.ceramint.2018.04.110
- ISSN
- 0272-8842
1873-3956
- Abstract
- In this study, the effects of the strontium (x = 0.2-0.7) contents on oxygen permeation properties of 60 wt% Ce0.8Sm0.2O2-d - 40 wt% Sm0.8Sr0.2Cu0.2Fe0.8O3-d (SDC-8228) and 60 wt% Ce0.8Sm0.2O2-d - 40 wt% Sm0.3Sr0.7Cu0.2Fe0.8O3-d (SDC-3728) dual-phase (DP) ceramic membranes obtained by one-pot synthesis of a pure Ionic Conducting (IC) phase with a Mixed Ionic-Electronic Conducting (MIEC) phase were investigated under different conditions of temperature (800-1000 degrees C) and CO2 atmosphere (0-100%). As a result, it was confirmed that the oxygen permeation properties of selected IC/MIEC DP membranes had increased when the Strontium content (Sr-x) of the MIEC phase increased from Sr-x (=) (0.2) to Sr-x (=) (0.7). The results showed that the SDC-3728 DP membrane exhibits higher oxygen flux than the SDC-8228 DP membrane. In detail, the oxygen permeation flux reached similar to 0.5 mL min(-1) cm(-2) at 1000 degrees C, which was about was one and a half times higher than the SDC-8228 DP membrane. An additional performance improvement was achieved by coating the SDC-3728 DP membrane with a pure Electron Conductor (EC) like Palladium (Pd) by the electroless deposition technique. The oxygen permeation flux of the Pd surface-modified SDC-3728 DP membrane was similar to 2.0 mL min(-1) cm(-2) in 100% CO2 at 1000 degrees C, which was about three times higher than the SDC-8228 DP membrane.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - College of Engineering > Department of Chemical and Biochemical Engineering > 1. Journal Articles

Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.